Dryer bearings

Dryer bearings

How to replace dryer bearings

• First, unplug the dryer or turn off its electrical supply to ensure your safety.
• Locate and remove the dryer's front panel. This may involve removing screws or releasing spring clips. Refer to your dryer's user manual for specific instructions.
• Once the front panel is removed, you should have access to the dryer's drum. Look for the drum support rollers or bearings, usually located at the back of the drum on the dryer's rear bulkhead.
• Remove the belt from the dryer drum. You may need to release the tension by pulling on the idler pulley or motor bracket. Take note of the belt's configuration or refer to your dryer's user manual for guidance.
• Once the belt is detached, carefully lift and remove the drum from the dryer. Place it aside on a soft surface to prevent scratching.
• Inspect the drum support rollers or bearings. If they are worn, damaged, or making squeaking noises, it's time to replace them.
• Using the appropriate tools, remove the old bearings from their housing or shaft. This may involve loosening retaining clips, screws, or bolts.
• Install the new bearings into the housing or shaft, following the reverse order of the removal process. Ensure they fit securely and rotate smoothly.
• If necessary, inspect the drum glides or slides located on the front bulkhead and replace them if worn or damaged. These components provide support and smooth movement for the drum.
• Apply lubricating oil or grease to the new bearings and drum glides/slides. Follow the manufacturer's instructions for the specific type of lubricant you're using.
• Reassemble the dryer by reversing the steps you followed to disassemble it. Make sure to reconnect the belt properly and ensure it is correctly tensioned.
• Plug in the dryer or restore its electrical supply. Test the dryer to ensure it's operating smoothly and that the new bearings have resolved any issues.

Note: The above steps are a general guide and the specific process may vary depending on your dryer model. Always consult your dryer's user manual for detailed instructions and safety precautions. If you're unsure, it's best to seek professional assistance from a qualified technician.

How to check if your dryer bearings need replacing

• Unusual noises: Pay attention to any unusual noises coming from your dryer during operation. Squeaking, grinding, or rumbling sounds can be indicative of worn-out bearings.
• Drum wobbling or misalignment: If you notice that the dryer drum is wobbling or not spinning smoothly, it could be a sign that the bearings are worn and no longer providing proper support.
• Difficulty rotating the drum: Try manually spinning the dryer drum with your hand when the dryer is off. If it feels stiff, doesn't rotate smoothly, or has resistance, it may indicate a problem with the bearings.
• Excessive heat or burning smell: Faulty bearings can cause increased friction, leading to overheating. If you notice excessive heat around the dryer or detect a burning smell, it's crucial to investigate further, as this could be a sign of bearing issues.
• Visible wear or damage: Inspect the drum support rollers or bearings for visible signs of wear, damage, or rust. Excessive wear, flat spots, or loss of lubrication are indications that the bearings may need replacement.
• Uneven drying: If your clothes are not drying evenly or taking longer to dry than usual, it could be due to the drum not spinning properly because of worn-out bearings.

Consult your dryer's user manual for specific troubleshooting steps and instructions.

Check out the Statewide blog

We make DIY a breeze with our handy hints and guides – from our best washer and dryer tips to make laundry day a breeze to tips on how often you should clean your dryer lint filter.

Find dryer spare parts and all your washer and dryer genuine parts at Statewide

• To find the right dryer spare part you will need your appliance model number.
• If unsure where to find your model number, check out our guide. Most manufacturers place the model number on the back exterior of the unit or on the inside of the door.
• Search on our website by brand and model number to find the correct part.

Buy your dryer spare parts online at Statewide

Statewide Appliance Spares are Australia’s largest distributor of genuine parts and accessories for all leading brands of household appliances. With over 37 years of experience in the industry, Statewide Appliance Spares has developed a reputation for excellence in customer service. We offer fast and reliable shipping, ensuring our customers receive their parts quickly. Shop washer and dryer spares with the lowest prices, guaranteed.